Wage Benchmarking for Electrical Contractors: Pricing the Whole Crew
By Rovaryn Digital · November 20, 2026 · 9 min read

The Offer That Fixed One Seat and Broke the Crew
A 35-person electrical contractor loses a journeyman to a competitor on a Monday. The owner pulls up a salary page, finds the electrician median, and writes an offer for the replacement a few dollars above it. The candidate accepts by Wednesday. By the following Friday, two of the existing journeymen have heard the number through the shop grapevine, and the lead apprentice has asked why he is still at the same step he was at six months ago. One careful offer to one seat just put pressure on every seat around it.
That is the trap in treating electrician pay as a single number. An electrical shop does not employ "an electrician." It employs apprentices at several steps, journeymen, a foreman or two, and maybe a service tech, each priced against a different slice of the labor market and each aware of what the others earn. A benchmark that prices one seat in isolation tends to create the next hiring problem.
This guide shows how to run electrical contractor wage benchmarking at the crew level: where the free federal data stops, how to anchor each seat, and how to check your whole ladder against your metro before the next offer goes out.
Why Electrical Contractor Wage Benchmarking Starts With the Crew
The scale of the trade explains why the data is worth using. BLS counted 757,220 electricians in its May 2025 OEWS release, and the 2022 County Business Patterns count 81,842 electrical contractor establishments (NAICS 238210).
BLS projects electrician employment to grow 9% from 2024 to 2034, with roughly 81,000 openings a year (BLS Occupational Outlook Handbook, Electricians). For national pay, the same handbook lists a median of $62,350 a year for electricians as of May 2024.
That national median is a useful orientation point, not an offer. It blends every state, every metro, and every experience level that BLS groups under electrician (SOC 47-2111). Your crew is narrower than that blend in some ways and wider in others. Three questions turn the national number into something you can price against:
- Which seats are you pricing? Apprentice steps, journeyman, foreman and service work do not share one distribution.
- Which market are you hiring in? Your competitors are local, so the right comparison is your metro, not the country.
- Which percentile are you choosing to pay? That is a policy decision, not a data lookup.
The electrician salary guide covers the national picture in more depth. The rest of this piece is about applying it to a team.
Pull the Right Data From BLS OEWS
OEWS is free and public domain, and it is the authoritative source for what employers report paying. Nothing in this article requires a paid tool. You can do all of it with bls.gov and a spreadsheet; the question is how many hours you want to spend doing it.
A few mechanics matter before you start:
- Five percentiles. OEWS publishes the 10th, 25th, 50th, 75th and 90th percentile wages, and annual figures are the hourly rate multiplied by 2,080 hours (BLS OEWS methodology).
- Vintage. The current release is May 2025, published May 15, 2026, after a delay caused by the federal shutdown of October 1 to November 12, 2025. BLS reported that the response rate stayed within its normal range and that no methodology changes were needed. The prior release is May 2024. Write the vintage next to every wage you record.
- Geography. OEWS covers about 530 metropolitan and nonmetropolitan areas as well as states and the nation. If you are unsure which area your shop sits in, read what an MSA is and why it matters for wage data.
- Sample. The May 2025 technical note describes about 1.1 million establishments sampled over six semiannual panels across three years, representing about 55% of national employment.
Because OEWS is a survey of employer payrolls, it describes what establishments pay on average across their workers in an occupation. It does not break out your union local's scale, your prevailing-wage jobs, or the premium a shop pays for a hard-to-find license class. Treat it as the market frame and layer your own constraints on top.
One more caution. State and metro electrician figures change with each release, and numbers copied from old articles or forum posts are often a vintage or two behind. Pull the metro row from the current OEWS release on bls.gov rather than relying on a figure someone else quoted. The state-by-state electrician breakdown shows how wide the geographic spread can be.
Map Your Crew to Seats
OEWS has an occupation for electricians and a separate one for supervisors. Most shops can map their payroll like this:
- Apprentices. Registered apprentices are paid on a progression tied to the journeyman rate, so they are not benchmarked directly against the journeyman distribution. Price them as a percentage of the journeyman rate you set.
- Journeymen. This is the seat the electrician percentiles describe most directly, and the one where your percentile choice matters most.
- Foremen and lead hands. These roles sit in a supervisor occupation rather than the electrician one. Do not stretch the journeyman distribution to cover them. Pull the first-line supervisor data for construction trades separately.
- Service and specialty techs. If you run a service van or low-voltage side, decide honestly whether those techs sit inside the electrician distribution or need their own comparison.
For a sense of how apprenticeships are built: registered programs require at least 2,000 hours of on-the-job training and 144 hours of classroom instruction per year, and most construction programs run two to four years (U.S. DOL Office of Apprenticeship, via IWPR, 2024). Federal data on registered apprentices across all industries from 2019 to 2022 shows average pay rising from $18 an hour at entry to $32 an hour at completion, a 77% increase. That is an all-industry average, not an electrical figure, so use it only to understand the shape of a progression: pay steps up as skill and hours accumulate.
For a template of how those steps are laid out, see the apprentice, journeyman and master pay bands article.
Build the Ladder From One Anchor
The most useful habit in crew benchmarking is to set one decision and derive everything else from it. Choose a percentile for the journeyman seat, then price the rest of the ladder relative to that rate. Otherwise you end up with a stack of unrelated numbers that cannot be defended to the crew.
Here is a worked example with round inputs, not a market claim. Suppose you decide your journeyman anchor is $30 an hour, which you took from the percentile you chose in your metro.
- Annual equivalent: $30 × 2,080 hours = $62,400.
- Band with a 10% spread: minimum $27 an hour ($56,160), midpoint $30 ($62,400), maximum $33 ($68,640).
- Apprentice steps as a share of journeyman rate: if your program starts at 50% and rises in 10-point steps, the dollar rates are $15, $18, $21, $24 and $27 an hour. The percentages are placeholders for illustration; use the progression in your own registered program.
Two things fall out of this. First, the top apprentice step lands at the bottom of the journeyman band, so the day someone tops out, the raise to journeyman does not create an awkward overlap. Second, a new journeyman hire at the band maximum is $3 an hour above your midpoint, which makes the compression problem from the opening visible before you make the offer instead of after.
Choosing the anchor is the hardest judgment in the process, and the guide to which percentile you should pay covers the tradeoffs. As a general rule, a lower percentile saves payroll but widens the gap to competitors, while a higher percentile costs more per seat but narrows it. Which is right depends on how hard seats are to fill in your market and how long they stay filled.
Check Metro by Metro, Then Price the Cost of Getting It Wrong
If you operate in one metro, you run your electrical contractor wage benchmarking ladder once. If you cover several markets, run it for each and note where the same job is priced differently. Keep the vintage and the percentile consistent so the comparison is clean. Only the geography should change.
When a metro row is missing or marked as suppressed in OEWS, fall back to the state or the nearest comparable area and say so in your notes. A fallback you documented is far easier to defend than a number you cannot trace.
Then price the downside. Replacing a worker is expensive, and the cost is not just the wage gap:
- SHRM's 2022 analysis puts the average cost per hire at about $4,700.
- Gallup's 2019 research estimates that replacing an employee costs from half to two times annual salary, which Gallup calls a conservative estimate.
Those figures describe all industries, so treat them as a reference point and add your own costs for lost billable hours and crew disruption. For context on how often people move, BLS JOLTS shows the construction quits rate at 1.8% in both 2024 and 2025, down from 2.4% in 2021 and 2022.
Once the numbers are set, write them into the offer. The guide to writing a trade offer letter walks through how to present base pay, progression and conditions so the candidate can see where the seat sits on your ladder.
Where the Electrical Contractor Wage & Hiring Kit Fits
You can build everything above by hand from bls.gov, and many owners do. The time cost is the problem. Finding the right occupation codes, reading percentile tables, checking vintage and suppression, and rebuilding the sheet every release is a Friday you did not plan to spend.
The Electrical Contractor Wage & Hiring Kit (NAICS 2382) is built for this situation: electrician and foreman OEWS distributions plus offer-check and hiring-cost sheets, the electrical contractor's wage board in one kit.
If you would rather generate a min, midpoint and max band from a chosen percentile and spread directly from national, state and metro data, SkilledMarkets joins BLS OEWS and O*NET occupational profiles by SOC code to do exactly that. You can join the waitlist to be told when it opens to your shop.
Whichever route you take, electrical contractor wage benchmarking comes down to the same discipline: pick the seat, pick the market, pick the percentile, date the data, and price the whole crew from one anchor.
O*NET occupational content referenced in SkilledMarkets tools is produced by the National Center for O*NET Development and licensed under CC BY 4.0.
Ready to go beyond the guide? Benchmark trade wages with live BLS data.
Get free wage guides in your inbox
BLS data explainers and salary band tips for trade contractors.

